| DAHFLOC 6502 for wastewater containing suspended particles of anionic charge, and the charge in addition to the adsorption and bridging, so that good formation of aggregation (FLOC) outside; dissolved in water can be combined with the anionic water-soluble substances, insoluble in forming The water complex, and then be aggregated, precipitated. Therefore, the market can handle the existing wastewater plant dyeing bleaching agent could not be dealt with aggregation, and removal of active agents.
Apart from the above, DAHFLOC 6502 also called the epoch of new products, which can be particles of colloidal aggregation of sludge and sewage sludge, and to precipitate.
[General characteristics]
Appearance: colorless transparent liquid
Viscosity: about 100
PH (2% soln.): Approximately 4
Product Features
1. DAHFLOC 6502 is a liquid product, very easy to use.
2. DAHFLOC 6502 to neutralize the negatively charged cloud wastewater suspended particle surface and connected fracture molecules, thus achieving an excellent aggregation effect.
3. DAHFLOC 6502 capable of dissolving in water the anionic dye pigments (particularly difficult to deal with waste of the red line), surface-active agents, (such as refining agent, dyeing auxiliaries) mixing an anionic water-soluble substances, cohesion of water-insoluble complex, then put their aggregation and precipitation from wastewater.
4. DAHFLOC 6502 for colloidal sludge, sewage sludge and suspended particles hydrophilic protective protein sludge particles or hydrophilic surfaces (mainly bacteria sludge particles in the effluent, the height of the water and, hinder the collection of sludge particles) can be aggregated and hydrophobic particles
[Note]
1 To use the same bath time with other agents, please first confirm their compatibility and stability is correct, then moved on-site use.
2 manufacturers handle materials, different devices and operating conditions, so please make a small test, self-confirmation, then moved on-site use.
[Use]
When DAHFLOC 6502 alone, the effect of that is very significant; it is usually with an inorganic coagulant, such as: aluminum sulfate, polymer of anionic / non-ionic aggregation agents and use.
The following are only the representatives DAHFLOC 6502 using the sample list, that reference:
1. Dyeing Wastewater Treatment
DAHFLOC 6502 5 - 300ppm
Aluminum sulfate 100 - 400ppm
SANFLOC AH-210P 1 - 10ppm
※ PH wastewater Please adjusted with NaOH or lime to about 9, comparison chart below shows before and after bleaching.  2 paper industry wastewater treatment
DAHFLOC 6502 5-500ppm
SANFLOC AH-210P
Or 1-3ppm
SANFLOCN-OP
Below black liquor bleaching agent added preliminary renderings
3 Urban Waste Water Treatment
DAHFLOC 6502 3-5% (for the type of solid sewage sludge)
4. Urine oily wastewater treatment
DAHFLOC 6502 100-500ppm
[Effective range]
* Dyeing industrial wastewater * slip industrial wastewater
* Sewer metal processing industrial wastewater effluent *
* Gummy oil processing wastewater sludge *
* Paper Industry * Painting industrial wastewater discharge wastewater
* Meat * leather industrial wastewater processing wastewater
* Scouring oil industry wastewater effluent *
[Example] Wastewater Treatment
1 dyeing plant wastewater treatment:
a. disperse dyes, reactive dyes, direct dyes, anionic dyes, active agents, pigment-containing wastewater. Project | Before treatment | After-treatment
| The method of treatment chemicals | Exterior | Dark purple haze | Colorless | PH | 10 | 6.5-7.5 | DAHFLOC 6502 5(ppm) | BOD | 170-280 | 40 | The first iron sulphate400（ppm） | COD（ppm） | 200-300 | 50 | Lime150（ppm） | SS（ppm） | 20-40 | 7 | Settlement deal | Grease（ppm） | 10-20 | 5 | | Degree of perspective（cm） | 8 | 20 | |
b. reactive dyes, disperse dyes, reactive agents, the pigment-containing water. Project | Before treatment | After-treatment | The way to deal with agents | Exterior | Orange haze | Colorless | PH | 7.6 | 6.7 | DAHFLOC 6502 50(ppm) | BOD | 200 | 52 | Aluminum sulfate300（ppm） | COD（ppm） | 69.6 | 27.7 | SANFLOC AH-210P 5(ppm) | SS（ppm） | 46 | 10以下 | Floating processing |
2. The wool washing wastewater treatment item | | | The processing methods of medicament | | Grey cloudy liquid | | PH | 8-9 | 7.0-7.5 | DAHFLOC 6502 200（ppm） | SS（ppm） | 8000 | 50 | PAC 3000(ppm) | BOD | 5000 | 130 | SANFLOCN-OP 30(ppm) | grease （ppm） | 5000 | 20 | Floating on the processing |
3. Paper industry combined wastewater treatment cases item | | | The processing methods of medicament | | 400 | 100以下 | DAHFLOC 6502 45（ppm） | SS(ppm) | 560 | 50以下 | SANFLOC AH200P 0.5(ppm) | PH | 6.8 | 6.2 | To deal with ups and downs |
【 matters should be paid attention to when using 】 1. To be on the safe side, use our agent, please wear protective gloves. 2. If eyes accidentally come into contact with the agent, please direct to tap water rinse his eyes more than 15 minutes; And check to ophthalmic clinic treatment. 3. Inhale too much or too long DAHFLOC smell and feeling not well, 6502 to air LiuTongChu, breathing the fresh air, quiet and rest. When necessary, should go to a doctor diagnosis and treatment. 4. Swallowed this agent, shall be immediately to drink two to three cups of water or milk, in order to help vomiting; When necessary, should see a doctor. 5. If the agent adhered to the skin, should flush the area with water. 6. After each use, it is best to face clean, hand etc. |
